Home
so,i now own a gsxr k1 1000 with blown engine and with front and rear end in great condition..for the start i read that it is possible to swap to k1 front just by using it complete and putting on top a nsk hr32906(30x47x12) bearing.since i have it complete(wheel,calipers,triples etc)it seems easy swap for the 1100w(streetfighter no fairings).so grand master is it so simple?or does it need further modifications?thanks again
2 posters
k1 1000 front end to gsxr 1100w 1993
giannishazel- join date : 2011-09-04
Message : 6
Location : crete
ghostrider.1127- admin
- join date : 2011-02-02
Message : 200
Location : Berlino (DE) Stockholm (SVE)
age : 51
may 1000 fork are short for 11 w
but swap can do with no big issue (grind steering stopper , and make new)
also rear end swap isn t a big trouble !!!
but swap can do with no big issue (grind steering stopper , and make new)
also rear end swap isn t a big trouble !!!
giannishazel- join date : 2011-09-04
Message : 6
Location : crete
thanks a lot.i already did the front end swap.easy enough.my next step will be the headers maybe from k5 if possible...i will let you know!thanks again
ghostrider.1127- admin
- join date : 2011-02-02
Message : 200
Location : Berlino (DE) Stockholm (SVE)
age : 51
headers from 1000 k1>k4, with k5-k6 isn t possible (k2>k4 are titanium too)