hey there..i would like to know if i could use rf900 drilled front rotors on my gsxr 1100w..do they have the same offset?thaks in advance
2 posters
rf900 rotors on gsxr1100w
ghostrider.1127- admin
- join date : 2011-02-02
Message : 200
Location : Berlino (DE) Stockholm (SVE)
age : 51
- Post n°2
Re: rf900 rotors on gsxr1100w
rf 900
Outside Diameter 310
Inside Diameter 64
Bolt Hole Quantity 5
Bolt Hole Size 10.5
Thickness 4.5
Minimum Thickness 4.0
Offset 19.5
gsxr 1100W (all)
Outside Diameter 310
Inside Diameter 64
Bolt Hole Quantity 5
Bolt Hole Size 10.5
Thickness 5.0
Minimum Thickness 4.5
Offset 22.0
you can swap , but also space in the caliper
Outside Diameter 310
Inside Diameter 64
Bolt Hole Quantity 5
Bolt Hole Size 10.5
Thickness 4.5
Minimum Thickness 4.0
Offset 19.5
gsxr 1100W (all)
Outside Diameter 310
Inside Diameter 64
Bolt Hole Quantity 5
Bolt Hole Size 10.5
Thickness 5.0
Minimum Thickness 4.5
Offset 22.0
you can swap , but also space in the caliper
giannishazel- join date : 2011-09-04
Message : 6
Location : crete
- Post n°3
Re: rf900 rotors on gsxr1100w
thanks a lot..i already put the discs with 3.5mm spacers between the caliper and the fork..the discs are used measured 4.8mm thickness so i guess it will be ok!!!i will post some pics as long as i am done with this streetfighter.....keep it up!!!
giannishazel- join date : 2011-09-04
Message : 6
Location : crete
- Post n°4
Re: rf900 rotors on gsxr1100w
hmm...i thought that the oem rotors of gsxr1100 were 5.5 new and the rf900 5mm new...so the offset of the gixxer would be 22.5 and the rf 19.5...so for sure for the swap you need 3mm spacers to put the caliper to the center of the wheel...easy and effective!!thanks again
|
|